Elk Antler Mount

Elk Skull Antler Mount

Assembly:

1. Prepare the Antlers 
   • • Drill the center of each antler base using a ¼" drill bit
     • Choose a high-strength lag screw to secure the antler
       • Recommended: #14 x 3" lag screw for low to medium-weight sheds
         
2. Install the Bullet Anchors
   • Slide the screw through the bullet anchor, then screw it into the drilled hole in the antler
   • To prevent the antler from spinning, apply a small dab of epoxy between the anchor and the antler
3. Mount the Antlers
   • Insert the bullet anchor (with antler attached) into the skull’s mount feature
   • Push firmly until fully seated
   • Repeat for the second antler
   • Current size of bullet anchors creates a semi-permanent assembly due to the friction fit.  It is not designed to be removed easily

     Please read below

     • It is the user’s responsibility to ensure the final print is structurally sound, properly assembled, and suitable for supporting the weight of antlers or other mounted materials.
       
     • Always test your setup in a safe environment before wall mounting or long-term display.